Any Scuba/Dive shop will allow you to purchase a compressed air tank (typically, they stand about mid-thigh high and hold up to 3000psi). Once you´ve purchased the scuba tank and filled it, all you need to do is mount this fill station adapter to the top of it.
It´s self-explanatory to mount, it can only go on one way. Attach your compressed air paintball tank to the fill nipple, close the release valve on the fill station, open the flow of gas using the large knob on the scuba tank, and air will flow into your paintball gun´s compressed air tank. Once the flow of gas has stopped (meaning pressure has equalized between the two tanks), turn off the flow of gas using the large knob on the scuba tank.
Twist the release valve on the fill station, unhook your compressed air tank, and go play paintball! Simple enough.
04060008
No customer reviews for the moment.
Your comment is submitted
Easy operation. Pushbutton vent. Can Be used with Scuba Tanks with A Clamp / Yoke connector Rated for 300bar/4500psi
Totem Air "Tattoo" 1.5L/88ci 4500 psi UL Composite Tank
1.5L Tank (88Ci) Pressure 4500 PSI UL (Ultra Light). PI0029 standard Composite Tank with aluminum inner shell and polyurethane shock and abrasion-resistant coating. Hydrotest every 5 years
Characteristics:
Diameter: 10.5 cm Length: 25 cm Maximum pressure: 4500 PSI / 310 bar Empty weight: 940 g
Totem Air "Tattoo" 0.8L/48ci 4500 psi UL Composite Tank
0.8L Tank (48Ci) Pressure 4500 PSI UL (Ultra Light). PI0029 standard Composite Tank with aluminum inner shell and polyurethane shock and abrasion-resistant coating. Hydrotest every 5 years
Characteristics:
Diameter: 10.5 cm Length: 16.5 cm Maximum pressure: 4500 PSI / 310 bar Empty weight: 670 g
PTFE sealing tape eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, and bell jars. It provides a vacuum-tight seal, yet will release readily even after long periods of time.
This hose serves primarily to convey air from one cylinder to another. As the name suggest, it is equipped with a bleed valve to get rid of unwanted air which accumulates inside the hose.