Preset with excellent quality at low prices.

Great for paintball scenario, tactical or recreational. Flexivel which allows you to maneuver through even the most difficult terrain. It is very durable and works with all cylinders of compressed air and Co2

An on/off valve for a paintball gun comprises a valve body.

The latest Totem Air creation, the "Totem Air Regulator Pro Swivel," is excellent and surprisingly reasonably priced.

The regulator's output pressure is adjustable from 500 to 800 psi.  The preset outlet pressure can be modified by omitting washers. A regulator with one disk left in it will provide an output of roughly 450 to 500 psi. You will have 800 psi if you leave the regulator in its current state.

Additionally, the filling nipple's position can be flexibly adjusted. You can turn it on the adjustment wheel to your desired position after loosening three screw bolts. This will prevent the fill nipple to be positioned under the marker or in another undesireble position.

Totem Air "Tattoo" 0.8L/48ci 4500 psi UL Composite Tank

Totem Air "Tattoo" 0.8L/48ci 4500 psi UL Composite Tank

• Comes with an on / off valve, to make shutting off the CO2 flow to the gun easy - Just turn the valve off and unscrew the tank, saving you lots of air!
• Approximately 500 shots per fill

The gas efficiency of the valve in your paintball gun and the temperature during play.

Service pressure: 124 bar/1800 psi

• High quality aluminum cylinder with industry standard pin valve
• Approximately 500 shots per fill

Totem Air "Tattoo" 1.5L/88ci 4500 psi UL Composite Tank

Comes with an on / off valve, to make shutting off the CO2 flow to the gun easy - Just turn the valve off and unscrew the tank, saving you lots of air!
Approximately 1100 shots per fill, never have to worry about running out of air mid-game

Easy operation.

Pushbutton vent.

Can Be used with Scuba Tanks with DIN connector

Rated for 300bar/4500psi