With the Manta Air Hole Plug you can close either a connection of your storage tank or the end of a compressed air hose. It’s the way to go to blind your Manta Paintball filling system.
Totem Air Comp Air Fill Station Din Type with Hose and Quick Disconnect
Reference: 04060012
€53.95
Tax included
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi
Any Scuba/Dive shop will allow you to purchase a compressed air tank (typically, they stand about mid-thigh high and hold up to 4500psi). Once you´ve purchased the scuba tank and filled it, all you need to do is mount this fill station adapter to the top of it.
It´s self-explanatory to mount, it can only go on one way. Attach your compressed air paintball tank to the fill nipple, close the release valve on the fill station, open the flow of gas using the large knob on the scuba tank, and air will flow into your paintball gun´s compressed air tank. Once the flow of gas has stopped (meaning pressure has equalized between the two tanks), turn off the flow of gas using the large knob on the scuba tank.
Twist the release valve on the fill station, unhook your compressed air tank, and go play paintball! Simple enough.
04060012
No customer reviews for the moment.
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi
in the same category
16 other products in the same category:
A tool that is used during the service of a Manta Quick Filler. The tool is specially designed for easy access to the quick fillers internals if you want to replace any part inside.
Manta Air Level Valve Filling Hose
4 stars -based on 250 reviews
Manta Lever Valve Filling Hose for Filling Hoses - replacement hose for your Manta paintball filling system. This hose is a complete spare part consisting of hose, thread and female adapter.
Totem Air Storage Tank 50 L - 300 Bar with...
4 stars -based on 250 reviews
50 liter refill cylinder, so you can connect to your compressor and have good autonomy to fill your paintball tanks.
Measurements: 155x20
Internal replacement/repair part for filling panels/Quick filler Manta, to stop air leaks.
Also have the "Manta Air Valve Insert Key", so you can disassemble and remove the part.
Totem Air Comp Air Fill Station Oring Kit
4 stars -based on 250 reviews
Complete Oring Kit for Fill Stations
Manta Air Air Line Splitter with Pressure Gauge
4 stars -based on 250 reviews
The Air Line Splitter comes with three interchangeable couplings and a pressure gauge, which could be interchanged as well.
Manta Dual Fill Panel , input 3000 or 4500 PSI,...
4 stars -based on 250 reviews
The Manta Dual Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. It is possible to charge two cylinders simultaneously. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
Rubber replacement part for the Manta filling handles.
