Português PT
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi
English
Manta Air O-ring ZD-3514
- Write a review
€0.95
Tax included
16 other products in the same category:
50 liter refill cylinder, so you can connect to your compressor and have good autonomy to fill your paintball tanks.
Measurements: 155x20
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with A Clamp / Yoke connector
Rated for 300bar/4500psi
A tool that is used during the service of a Manta Quick Filler. The tool is specially designed for easy access to the quick fillers internals if you want to replace any part inside.
The Air Cutoff Valve permits its users to turn the air off to a compressor or fill panel by closing the air lines.
The Air Line Splitter comes with one male and three female couplings, which could be interchanged.
Maximum working pressure 35MPa
Power supply, typical HP 5/8" socket
Weight 660g
Total dimensions 105x35x140 mm
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
If you want to connect two hoses with each other you may require the Air Line Connector. This adaptor has two female hand-tight connections on the both sides.
Connect effortlessly to any HP installation point with adaptable configurations. This regulator reduces pressure in you Manta Paintball filling system from 300 bar to 200 bar, ensuring worry-free self-service use at dedicated 200-bar stations, preventing clients from exceeding bottle pressure limits. The cover is a safety feature that prevents adjustments to the pressure reducer by unauthorized personal as it’s secured with screws against removal.
