Português PT
This is a high quality micro gauge to display your current pressure from your regulator. Great upgrade or addition to your paintball marker!
English
Totem Air Macroline Hose
- Write a review
€7.95
Tax included
For use with Macroline 6.3 mm hose fittings only. Awesome alternative to steel braided hoses that never seem to be long or short enough.
30 cm
Will work with CO2 or Compress air. Handles the same pressure as other hoses and it's easier to remove from your gun, as there are no tools required to remove macroline hose from the macroline compression fittings.
04190008
12 other products in the same category:
Ninja macroline fitting
Straight fitting design
For use with macroline hose
Easy push in and lock system
Pre-taped with thread sealer
PTFE sealing tape eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, and bell jars. It provides a vacuum-tight seal, yet will release readily even after long periods of time.
Lost your connector from the remote to the marker? Here's the solution...
The Pro Mini Rail fits perfectly on our Pro Mini On /Off ASA or any standard Dovetail ASA.
For use with Tank mounted adjustable regulators. Tanks that screw in will NOT fit with this dropforward without additional parts.
Dirt, paint and other debris getting in your fill nipple works its way through your HPA tank, destroying seals and o rings in both your tank and marker.
Fill nipple covers protects the nipple form any dirt or damage from being done to the nipple.
The Quick Disconnect O-Ring is a replacement o-ring for the female side of a quick disconnect
Durable steel / stainless steel
Disconnect a de-pressurized gas line
Brass slide check
Easy installation for last minute repairs
Extend your advantage with the Eclipse reg-extender.