- Special Offers New
- Paintballs addremove
- Markers addremove
- Goggles addremove
- Air Systems addremove
- Gear addremove
- Loaders addremove
- Accessories addremove
- Field addremove
Totem Air 20 Oz Pi Bottle No Valve
Reference: 04020006
The gas efficiency of the valve in your paintball gun and the temperature during play.
![](https://www.estrategopaintball.com/433-large_default/totem-air-20-oz-pi-bottle-no-valve.jpg)
The gas efficiency of the valve in your paintball gun and the temperature during play.
in the same category
Armotech Supralight 0.8L/48ci 4500 psi UL...
0.8 Liter (4500 PSI / 300 bar)
PI certification
Weight 550g
Diameter 100 mm
Length 180 mm
Totem Air Regulator Part S10 - 7.5K Burst Disk
Used on 4500 PSI preset regulators
Totem Air 20 Oz Pi Bottle + Pin Valve
Your gun isn´t going to shoot itself, is it?
Totem Air Regulator Part S11 Gauge
This is a high quality micro gauge to display your current pressure from your regulator. Great upgrade or addition to your paintball marker!
Armotech Core Air System 1.1L/68ci 4500 psi...
1.1 Liter Tank (4500 PSI / 300 bar)
PI certification
Weight 800g
Diameter 110 mm
Length 197 mm
Regulator with HP 800 psi or LP 450 psi Output
Valken "The Unit" Paintball Fill Station
Paintball compressed air fill stations were once expensive, high-maintenance pieces of equipment but those days are over with the introduction of THE UNIT Fill station for paintball! Simple to operate for almost any customer and just as easy to keep clean and maintained for reliable operation, THE UNIT makes filling a paintball air system easy and safe. Constructed from solid billet aluminum with CNC machined air passages and operated with a simple lever, THE UNIT has no moving o-rings, filtered exhaust, side and front air outlets and can be completely rebuilt in seconds! For consistent, reliable and user-friendly paintball compressed air system fills, THE UNIT is unbeatable.
Totem Air Regulator Part S9 Fill Nipple
Replacement Fill Nipple for your compressed air tank. ALWAYS completely empty your tank before working on it.
Totem Air Quick Disconnect Stainless Steel 3000...
Durable steel / stainless steel
Disconnect a de-pressurized gas line
Brass slide check
Easy installation for last minute repairs
This is a high quality micro gauge to display your current pressure from your regulator. Great upgrade or addition to your paintball marker!
Totem Air "Tattoo" 1.5L/88ci 4500 psi UL...
Totem Air "Tattoo" 1.5L/88ci 4500 psi UL Composite Tank
PI0029 standard
Composite Tank with aluminum inner shell and polyurethane shock and abrasion-resistant coating.
Hydrotest every 5 years
Length: 25 cm
Maximum pressure: 4500 PSI / 310 bar
Empty weight: 940 g
Totem Air Regulator Part S07 Fill Nipple Oring
Parts to repair Totem Air Preset Regulators.
Dye UL1.2L/68ci 4500psi Composite Tank
These tanks are very light weight with their 1.2 Liter tank weighing only at 1.52 pounds making the new Safer paintball tank one of the lightest on the market.