Reference: 04040032
Parts to repair Totem Air Preset Regulators.
No customer reviews for the moment.
Parts to repair Totem Air Preset Regulators.
These are excellent replacement orings for your C02 or Compressed Air tank. Always keep a bunch of these around or you'll be begging everyone in the staging area for a spare.
Parts to repair Totem Air Preset Regulators.
Screws in any Standard 4500psi Tank, Plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down, Non wrist digging, low profile design fill valve, All black tactical look, Meets all DOT, CGA and ASTM specifications, 4500psi
Parts to repair Totem Air Preset Regulators.
Parts to repair Totem Air Preset Regulators.
Totem Air Micro SPL Regulator Regulator for pressures between 40 and 200 psi. Adjustable with only one tool, simple and uncomplicated. Lightweight and portable
Adjustable output pressure from 40psi to 200psi
Integral tournament lock can be secured with a standard zip-tie.
Compatible with standard HPA as well as SLP tanks.
Includes 36'' cable and HPE adaptor/connector US - Foster 23-2 1/8" Male NPT
Used CO2 Pin and On/Off Valves
Preset with excellent quality at low prices.
Parts to repair Totem Air Preset Regulators.
Centerflag inline regulator made with good quality materials with output control from 0-450 psi, using an allen adjustment wrench from below.
You can install a pressure gauge, so you can always check the inlet pressure for the marker.
This is a high quality micro gauge to display your current pressure from your regulator. Great upgrade or addition to your paintball marker!
Totem Air Regulator Part S10 - 5K Burst Disk
Used on 3000 PSI preset regulators
Parts to repair Totem Air Preset Regulators.
Preset with excellent quality for 3000 PSI bottles.
Totem Air Regulator Part S4 - 1.8K Burst Disk
Used on preset regulators with 3000 and 4500 PSI
The latest Totem Air creation, the "Totem Air Regulator Pro Swivel," is excellent and surprisingly reasonably priced.
The regulator's output pressure is adjustable from 500 to 800 psi. The preset outlet pressure can be modified by omitting washers. A regulator with one disk left in it will provide an output of roughly 450 to 500 psi. You will have 800 psi if you leave the regulator in its current state.
Additionally, the filling nipple's position can be flexibly adjusted. You can turn it on the adjustment wheel to your desired position after loosening three screw bolts. This will prevent the fill nipple to be positioned under the marker or in another undesireble position.
