The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
Totem Air Remote Oring Kit
Reference: 04070007
€4.95
Tax included
Complete Oring Kit for Quick Disconnects on Remotes
Any Scuba/Dive shop will allow you to purchase a compressed air tank (typically, they stand about mid-thigh high and hold up to 4500psi). Once you´ve purchased the scuba tank and filled it, all you need to do is mount this fill station adapter to the top of it.
It´s self-explanatory to mount, it can only go on one way. Attach your compressed air paintball tank to the fill nipple, close the release valve on the fill station, open the flow of gas using the large knob on the scuba tank, and air will flow into your paintball gun´s compressed air tank. Once the flow of gas has stopped (meaning pressure has equalized between the two tanks), turn off the flow of gas using the large knob on the scuba tank.
Twist the release valve on the fill station, unhook your compressed air tank, and go play paintball! Simple enough.
04070007
No customer reviews for the moment.
Complete Oring Kit for Quick Disconnects on Remotes
in the same category
16 other products in the same category:
Is a great way for the weekend player to save money by filling their own tank.
A tool that is used during the service of a Manta Quick Filler. The tool is specially designed for easy access to the quick fillers internals if you want to replace any part inside.
Manta Five Outlet Fill Panel , input 3000 or...
4 stars -based on 250 reviews
The Five Outlet Fill Panel, as the name suggests, allows its users to fill five paintball tanks simultaneously.
Connect effortlessly to any HP installation point with adaptable configurations. This regulator reduces pressure in you Manta Paintball filling system from 300 bar to 200 bar, ensuring worry-free self-service use at dedicated 200-bar stations, preventing clients from exceeding bottle pressure limits.
Rubber replacement part for the Manta filling handles.
The Transfiller is the simplest fill station with a bleed valve.
With the Manta Air Hole Plug you can close either a connection of your storage tank or the end of a compressed air hose. It’s the way to go to blind your Manta Paintball filling system.
Manta Transfiller with Hose and Pressure Gauge
4 stars -based on 250 reviews
This transfiller comes with a flexible hose to make filling much easier.
Manta Air Air Line Splitter with Pressure Gauge
4 stars -based on 250 reviews
The Air Line Splitter comes with three interchangeable couplings and a pressure gauge, which could be interchanged as well.
Manta Dual Fill Panel , input 3000 or 4500 PSI,...
4 stars -based on 250 reviews
The Manta Dual Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. It is possible to charge two cylinders simultaneously. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
The Air Cutoff Valve permits its users to turn the air off to a compressor or fill panel by closing the air lines.