Português PT
Manta Lever Valve Filling Hose for Filling Hoses - replacement hose for your Manta paintball filling system. This hose is a complete spare part consisting of hose, thread and female adapter.
English
Totem Air Comp Air Fill Station Oring Kit
- Write a review
€4.95
Tax included
Complete Oring Kit for Fill Stations
Any Scuba/Dive shop will allow you to purchase a compressed air tank (typically, they stand about mid-thigh high and hold up to 4500psi). Once you´ve purchased the scuba tank and filled it, all you need to do is mount this fill station adapter to the top of it.
It´s self-explanatory to mount, it can only go on one way. Attach your compressed air paintball tank to the fill nipple, close the release valve on the fill station, open the flow of gas using the large knob on the scuba tank, and air will flow into your paintball gun´s compressed air tank. Once the flow of gas has stopped (meaning pressure has equalized between the two tanks), turn off the flow of gas using the large knob on the scuba tank.
Twist the release valve on the fill station, unhook your compressed air tank, and go play paintball! Simple enough.
04060011
16 other products in the same category:
Rubber replacement part for the Manta filling handles.
Connect effortlessly to any HP installation point with adaptable configurations. This regulator reduces pressure in you Manta Paintball filling system from 300 bar to 200 bar, ensuring worry-free self-service use at dedicated 200-bar stations, preventing clients from exceeding bottle pressure limits.
Internal replacement/repair part for filling panels/Quick filler Manta, to stop air leaks.
Also have the "Manta Air Valve Insert Key", so you can disassemble and remove the part.
The B-MASTER filling panel is used to fill compressed air tanks with high pressure ranges of 200 to 300 bar, primarily for paintball markers.
The Maxi version has one air inlet and one regulated outlet: one outlet with 200 bars (3000 PSI) or 300 bars (4500 PSI).
1 input up to 6500 PSI, 1 regulated output of 3000 or 4500 PSI
Complete kit to maintain/repair your Manta panel/quick filler.
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi
Is a great way for the weekend player to save money by filling their own tank.
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi