Reference: 16150023
Includes a full-range of replacement parts for the Tippmann A-5™ markers.
Includes:
02-17: A-5/98/X7 Front Bolt (1)
SL2-4: O-Ring Buna Black 2-015 (2)
CA-14: A-5/98/PC/X7 Drive Spring (1)
CA-15: Pin Guide FLT HD 0.117 X 2.085 (1)
9-PA: Black Hex Nut #10-32x3/8 (6)
PL-42D: Square Nut Black 1/4 -20 (1)
CA-40: Screw SHCS ¼-20 X 5/8 (1)
98-45: Washer TPHS 8-32 X .25 (1)
02-22: Screw SHSS 5/16-24 X 7/16 (1)
02-37: A-5 Safety (1)
02-41: Screw SHCS ¼-20 X 7/8 (1)
02-20: Sear Spring Blue (2)
20-07: Banjo Fitting (1)
02-63: O-Ring Piston Buna U-Cup (1)
20-18: Hose Black Polyurethane 5/64 X 1 (1)
02-20S: Trigger Spring Red (1)
FA-18: Ball Latch – Orange (1)
PL-42A: Screw Grip 4 X 5/8 (6)
02-71: Washer Flat 9/32 (1)
02-72: Valve O-Ring 2-111-70A (1)
02-33: Pin Dowel Knurl 1/8 x ½ (4)
98-01A: Bolt LHSHCS 10-32 X .625 (6)
02-40: A-5 O-Ring Barrel Buna 13/16 X 15/16 X 1/16 (1)
18-PA: O-Ring Tank Valve Trans Urethane 9/16 X 11/16 X 1/16 (1)
02-PIN: A-5 Push Pin (2)
TA01016: A-5/X7/98 Linkage Arm (1)
98-12A: O-Ring Cast Urethane 2-019, 90A (2)
02-33A: Pin Dowel Knurl Black DP 1/8D X 1/2L (2)
TP03023: 4X4 Label – Tippmann Accessory (1)
02-35: A-5/98 Sear
02-42 Flange ¼ - 20 (1)
02-53: Feeder Ratchet (2)
02-86A: O-Ring Banjo Fitting (4)
98-PL: Valve Plunger (1)
CA-27: Valve Seat (1)
PA-32: A-5/X7 Valve Spring (1)
SL2-25: O-Ring Cast Urethane 2-012 (1)
98-03C: GN Box Seal Sticker (2)
TA01022: A-5 H.E. E-Grip Safety (1)
TA01058L 2010 A-5 Valve Seal (1)
No customer reviews for the moment.
Includes a full-range of replacement parts for the Tippmann A-5™ markers.
Universal design accomdates just about any marker. Allows hands free control of your paintball gun. Made with Super-Strong webbed nylon strap and plastic hook connections. The 3-Point design allows better adjustability and balance of your marker.
Here is a first look at our new "patent pending" Quick Exhaust Piston Housing for the Cyclone Loader. The QEPH is designed to rapidly vent the blast of air that is used to advance the loader.
This kit is a universale repair kit for the Tippmann X7 Phenom only. It does not work for the basic X7. That has its on kit.
Using our patent pending MRT Technology™, we have reduced the internal moving mass of the bolt assembly by nearly half.
The Tippmann X7 Phenom Deluxe Parts Kit contains the most common needed replacement parts and then some for your X7 Phenom. Get your marker running like new again with this kit!
The TechT Aluminum X7/A5 Fan Trigger is a light weight double trigger. This trigger is a smooth action pull with it's dual roller bearings and durable aluminum strength. This is a replacement from stock but comes with all necessary parts for an easy installation from the stock trigger.
Constructed from military grade glass filled nylon for durability.
The Hair Pin Trigger Kit is designed to make any electronic, manual, or Responsed Tippmann A5, X7's, or 98 trigger faster and more sensitive than ever before.
The BT Custom 98 Adjustable Sight Rail is a raised sight rail with mounting slide adjustments.
This high-performing Red-dot Sight with 3-dot crossbow reticle provides unlimited eye relief and wide field of view.
The M16 Carry Handle has accurate mil-sim looks, includes a sight peep hole and is constructed to provide a lifetime of reliable performance.
Length at base: 7 inches
Designed for maximum performance, the TechT Fang Trigger for the X7 and A5 Select Fire Grip a must for anyone looking to upgrade their marker.The Fang Trigger allows you to minimize trigger travel with two adjustment screws, and dual roller bearing design maximize your BPS like never before.
The Tippmann 2 Point Sling is made from a super-strong webbed nylon and accommodates just about any paintball marker allowing "hands-free" control of your gun.
The FANG Trigger is the highest quality billet aluminum, best feeling trigger available for Tippmann 98's, 98 Customs, and the new 98 Custom Pro E's.
Includes all basic O-Rings to fix your X7 Marker.
