Português PT
English
Manta Air Pressure Checker
- Write a review
€83.95
Tax included
The pressure checker is used for measuring the condition of compressed air. This instrument has a 5/8" male connection and an easy-to-read pressure gauge.
Parameters:
Maximum working pressure 35MPa
Power supply typical HP 5/8” socket
Weight 250g
Dimensions 110x38x38 mm
04140314
16 other products in the same category:
50 liter refill cylinder, so you can connect to your compressor and have good autonomy to fill your paintball tanks.
Measurements: 155x20
The Transfiller is the simplest fill station with a bleed valve.
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with A Clamp / Yoke connector
Rated for 300bar/4500psi
Manta Lever Valve Filling Hose for Filling Hoses - replacement hose for your Manta paintball filling system. This hose is a complete spare part consisting of hose, thread and female adapter.
The B-MASTER filling panel is used to fill compressed air tanks with high pressure ranges of 200 to 300 bar, primarily for paintball markers.
The Midi version has one air inlet and two unregulated outlets, with filling at inlet pressure.
1 input of 3000 or 4500 PSI, 2 outputs (same as input)
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
The Five Outlet Fill Panel, as the name suggests, allows its users to fill five paintball tanks simultaneously.
The Quick Filler is the fastest way to fill a paintball tank with high pressure air.