Totem Air Coltri Compressor Icon EM 100...
Charging rate
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
100 EM 100 l/min
6 m3/h
3.5 CFM
Purification system Eco-filter
Reference: 04140364
The Air Cutoff Valve permits its users to turn the air off to a compressor or fill panel by closing the air lines.
Charging rate
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
100 EM 100 l/min
6 m3/h
3.5 CFM
Purification system Eco-filter
With the Manta Air Hole Plug you can close either a connection of your storage tank or the end of a compressed air hose. It’s the way to go to blind your Manta Paintball filling system.
This hose serves primarily to convey air from one cylinder to another. As the name suggest, it is equipped with a bleed valve to get rid of unwanted air which accumulates inside the hose.
Dirt, paint and other debris getting in your fill nipple works its way through your HPA tank, destroying seals and o rings in both your tank and marker.
Great for paintball scenario, tactical or recreational. Flexivel which allows you to maneuver through even the most difficult terrain. It is very durable and works with all cylinders of compressed air and Co2
Easy operation.
Pushbutton vent.
Can Be used with Scuba Tanks with DIN connector
Rated for 300bar/4500psi
The Manta Dual Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. It is possible to charge two cylinders simultaneously. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
0.8 Liter (4500 PSI / 300 bar)
PI certification
Weight 650g
Diameter 111 mm
Length 155 mm
Keep your bottles clean and protected with a tank cover.
Used CO2 Pin and On/Off Valves
Screws in any Standard 4500psi Tank, Plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down, Non wrist digging, low profile design fill valve, All black tactical look, Meets all DOT, CGA and ASTM specifications, 4500psi
Totem Air "Tattoo" 1.5L/88ci 4500 psi UL Composite Tank
Allows the use of 12 gram CO2 cartridges in any marker with a standard ASA tank thread.
Made for equipment owner wanting an affordable solution to provide tank protection and grip.