Totem Air Regulator Part S9 Fill Nipple
Replacement Fill Nipple for your compressed air tank. ALWAYS completely empty your tank before working on it.
Reference: 04140363
The Air Cutoff Valve permits its users to turn the air off to a compressor or fill panel by closing the air lines.
Replacement Fill Nipple for your compressed air tank. ALWAYS completely empty your tank before working on it.
The Manta Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
Charging rate
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
100 EM 100 l/min
6 m3/h
3.5 CFM
Purification system Eco-filter
Bottle valve adapter particularly for pin valves.
1.1 Liter Tank (4500 PSI / 300 bar)
PI certification
Weight 800g
Diameter 110 mm
Length 197 mm
Regulator with HP 800 psi or LP 450 psi Output
Internal replacement/repair part for filling panels/Quick filler Manta, to stop air leaks.
Also have the "Manta Air Valve Insert Key", so you can disassemble and remove the part.
The Manta Dual Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. It is possible to charge two cylinders simultaneously. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
The Five Outlet Fill Panel, as the name suggests, allows its users to fill five paintball tanks simultaneously.
Complete kit to maintain/repair your Manta panel/quick filler.
The Five Outlet Fill Panel is made from a rust-free steel and has a high level of reliability.
Lost your connector from the remote to the marker? Here's the solution...
The Quick Disconnect O-Ring is a replacement o-ring for the female side of a quick disconnect
Keep your bottles clean and protected with a tank cover.