Português PT
English
Manta Air Air Line Splitter with Pressure Gauge
- Write a review
€183.95
Tax included
The Air Line Splitter comes with three interchangeable couplings and a pressure gauge, which could be interchanged as well.
This device can be used in a wide variety of configurations. Additional couplings are available separately.
Maximum working pressure 35MPa
Power supply, typical HP 5/8" socket
Weight 660g
Total dimensions 105x35x140 mm
04140315
16 other products in the same category:
Adapter for connecting Bauer cables to Manta filling panels.
A tool that is used during the service of a Manta Quick Filler. The tool is specially designed for easy access to the quick fillers internals if you want to replace any part inside.
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
The Air Cutoff Valve permits its users to turn the air off to a compressor or fill panel by closing the air lines.
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
The B-MASTER filling panel is used to fill compressed air tanks with high pressure ranges of 200 to 300 bar, primarily for paintball markers.
The Midi version has one air inlet and two unregulated outlets, with filling at inlet pressure.
1 input of 3000 or 4500 PSI, 2 outputs (same as input)
The Air Line Splitter comes with one male and three female couplings, which could be interchanged.
Maximum working pressure 35MPa
Power supply, typical HP 5/8" socket
Weight 660g
Total dimensions 105x35x140 mm
The 6-socket Air Splitter comes with six female couplings, which could be interchanged.
Complete Oring Kit for Fill Stations
The Quick Filler is the fastest way to fill a paintball tank with high pressure air.