Português PT
This transfiller comes with a flexible hose to make filling much easier.
English
Bauer B-Master Mini
- Write a review
€1,721.95
Tax included
The B-MASTER filling panel is used to fill compressed air tanks with high pressure ranges of 200 to 300 bar, primarily for paintball markers.
The Mini version has one air inlet and one unregulated outlet, with filling at inlet pressure.
1 input 3000 or 4500 PSI, 1 Output (same as input)
The B-MASTER filling panel is mounted externally, i.e. appropriate pipes must be laid between the compressor and the filling panel.
The pressure supply line can be distributed to additional panels (e.g. for multi-table filling with the same pressure) via a T-piece.
The filling pressure in the pressure vessel is displayed on a pressure gauge in bar/psi.
Filling pressures: 200 bar / 300 bar
Filling panels for table top assembly with closed plastic panel housing
Can be attached using four bores on the base
Direct valve actuation
Automatic bleed
Adjustable valve play
Max. and min. valve stop setting
Rust-free valves with several hundred thousand switching cycles
Pressure input at the back
Possibility of distributing pressure to several filling panels through a T piece
Connection of the filling hose at the back of the device- Space in front of the panel remains clear.
04140003
16 other products in the same category:
The Dual Outlet Fill Panel is a perfect solution for those who don't want to waste their time for filling.
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
Connect effortlessly to any HP installation point with adaptable configurations. This regulator reduces pressure in you Manta Paintball filling system from 300 bar to 200 bar, ensuring worry-free self-service use at dedicated 200-bar stations, preventing clients from exceeding bottle pressure limits. The cover is a safety feature that prevents adjustments to the pressure reducer by unauthorized personal as it’s secured with screws against removal.
The Manta Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
Connect effortlessly to any HP installation point with adaptable configurations. This regulator reduces pressure in you Manta Paintball filling system from 300 bar to 200 bar, ensuring worry-free self-service use at dedicated 200-bar stations, preventing clients from exceeding bottle pressure limits.
Paintball compressed air fill stations were once expensive, high-maintenance pieces of equipment but those days are over with the introduction of THE UNIT Fill station for paintball! Simple to operate for almost any customer and just as easy to keep clean and maintained for reliable operation, THE UNIT makes filling a paintball air system easy and safe. Constructed from solid billet aluminum with CNC machined air passages and operated with a simple lever, THE UNIT has no moving o-rings, filtered exhaust, side and front air outlets and can be completely rebuilt in seconds! For consistent, reliable and user-friendly paintball compressed air system fills, THE UNIT is unbeatable.
The Air Cutoff Valve permits its users to turn the air off to a compressor or fill panel by closing the air lines.
