Português PT
English
Bauer B-Master Midi
- Write a review
€2,736.95
Tax included
The B-MASTER filling panel is used to fill compressed air tanks with high pressure ranges of 200 to 300 bar, primarily for paintball markers.
The Midi version has one air inlet and two unregulated outlets, with filling at inlet pressure.
1 input of 3000 or 4500 PSI, 2 outputs (same as input)
The B-MASTER filling panel is mounted externally, i.e., appropriate pipes must be laid between the compressor and the filling panel.
The pressure supply line can be distributed to additional panels (e.g., for multi-table filling with the same pressure) via a T-piece.
The filling pressure in the pressure vessel is displayed on a pressure gauge in bar/psi.
Filling pressures: 200 bar or 300 bar (same as input)
Filling panels for tabletop assembly with closed plastic panel housing
Can be attached using four bores on the base
Direct valve actuation
Automatic bleed
Adjustable valve play
Max. and min. valve stop setting
Rust-free valves with several hundred thousand switching cycles
Pressure input at the back
Possibility of distributing pressure to several filling panels through a T-piece
Connection of the filling hose at the back of the device—space in front of the panel remains clear.
04140002
16 other products in the same category:
This transfiller comes with a flexible hose to make filling much easier.
The Quick Filler is the fastest way to fill a paintball tank with high pressure air.
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
The Steel Braided Hose allows users to connect a fill panel with a compressor or another fill panel. Our hoses have got male connections at each end.
The Manta Dual Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. It is possible to charge two cylinders simultaneously. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.
Adapter for connecting Bauer cables to Manta filling panels.
