Totem Air Storage Tank 50 L - 300 Bar with Single Valve

1.1 Liter (4500 PSI / 300 bar)

PI certification

Weight 800g

Diameter 110 mm

Length 197 mm

0.8 Liter (4500 PSI / 300 bar)

PI certification

Weight 650g

Diameter 111 mm

Length 155 mm

Screws in any Standard 4500psi Tank, Plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down, Non wrist digging, low profile design fill valve, All black tactical look, Meets all DOT, CGA and ASTM specifications, 4500psi

Preset with excellent quality at low prices.

These tanks are very light weight with their 1.2 Liter tank weighing only at 1.52 pounds making the new Safer paintball tank one of the lightest on the market.

0.8 Liter (4500 PSI / 300 bar)

PI certification

Weight 550g

Diameter 100 mm

Length 180 mm

Totem Air Micro SPL Regulator Regulator for pressures between 40 and 200 psi. Adjustable with only one tool, simple and uncomplicated. Lightweight and portable

Adjustable output pressure from 40psi to 200psi
Integral tournament lock can be secured with a standard zip-tie.
Compatible with standard HPA as well as SLP tanks.
Includes 36'' cable and HPE adaptor/connector US - Foster 23-2 1/8" Male NPT

1.5 Liter Tank (4500 PSI / 300 bar)

PI certification

Weight 850g

Diameter 110 mm

Height 290 mm

Regulator with HP 800 psi or LP 450 psi Output

Preset with excellent quality for 3000 PSI bottles.

1.1 Liter Tank (4500 PSI / 300 bar)

PI certification

Weight 650g

Diameter 100 mm

Height 220 mm

Regulator with HP 800 psi or LP 450 psi Output

Totem Air "Tattoo" 1.5L/88ci 4500 psi UL Composite Tank

The Totem Air 0.21 air paintball tank offers a slightly smaller tank.

1.1 Liter Tank (4500 PSI / 300 bar)

PI certification

Weight 800g

Diameter 110 mm

Length 197 mm

Regulator with HP 800 psi or LP 450 psi Output

The latest Totem Air creation, the "Totem Air Regulator Pro Swivel," is excellent and surprisingly reasonably priced.

The regulator's output pressure is adjustable from 500 to 800 psi.  The preset outlet pressure can be modified by omitting washers. A regulator with one disk left in it will provide an output of roughly 450 to 500 psi. You will have 800 psi if you leave the regulator in its current state.

Additionally, the filling nipple's position can be flexibly adjusted. You can turn it on the adjustment wheel to your desired position after loosening three screw bolts. This will prevent the fill nipple to be positioned under the marker or in another undesireble position.