Manta Dual Fill Panel with Pressure Reducer 1 output 200 bars 1 output 300 bars

Filling handle, from Manta panels.

The Manta Fill Panel is designed for charging high-pressure cylinders (200/300 BAR), has reliable lever valves with automatic vent, made of very high quality materials. At the end of the hose there is a quick-connect coupling with a fuse and a convenient handle. On both sides fit two typical HP 5/8′ inputs, allowing several panels to be connected in series. The Fill Panel has large, easy-to-read pressure gauges and a solid steel housing with an anti-corrosion coating. The recommended way to mount the device: fastening to the table or hanging on the wall.

Charging rate

Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.

100 EM 100 l/min

6 m3/h

3.5 CFM

Purification system Eco-filter

1.1 Liter Tank (4500 PSI / 300 bar)

PI certification

Weight 800g

Diameter 110 mm

Length 197 mm

Regulator with HP 800 psi or LP 450 psi Output

These are excellent replacement orings for your C02 or Compressed Air tank. Always keep a bunch of these around or you'll be begging everyone in the staging area for a spare.

0.8 Liter Tank (4500 PSI / 300 bar)

PI certification

Weight 650g

Diameter 111 mm

Length 155 mm

Regulator with HP 800 psi or LP 450 psi Output

1.5 Liter Tank (4500 PSI / 300 bar)

PI certification

Weight 1000g

Diameter 110 mm

Height 248 mm

Regulator with HP 800 psi or LP 450 psi Output

Totem Air Regulator Part S4 - 1.8K Burst Disk

Used on preset regulators with 3000 and 4500 PSI

Great for paintball scenario, tactical or recreational. Flexivel which allows you to maneuver through even the most difficult terrain. It is very durable and works with all cylinders of compressed air and Co2

Keep your bottles clean and protected with a tank cover.

Charging rate: 100 L/min - 6 m³/h - 3,5 CFM
Filling time cylinder 10 L - 0-200 Bar: 20 min
Dry weight: 37 Kg / 81.5 lbs
Dimensions:
height 35cm/13.7", width 78cm/30.7", depth 32cm/12.5"

Bottle is suitable for all compressed air systems. Combined with a preset regulator it offers an inexpensive entrance.

0.8 Liter Tank (4500 PSI / 300 bar)

PI certification

Weight 550g

Diameter 100 mm

Length 180 mm

Regulator with HP 800 psi or LP 450 psi Output

Preset with excellent quality for 3000 PSI bottles.